Like Us On Facebook Follow Us On Twitter Circle Us On Google+ Subscribe To Us On Youtube
Sarge's Car Blog
Blog
  Hello troops and welcome back to 'The Sarge's Blog'!                 We're going to continue with the build of the 2003 Ford P.. Read More
        The website expansion continued this month with some new products lines as well as additions to existing ones. We added some new Peterson lamps in the form o.. Read More
        Welcome to our website. This section will be dedicated to our customers and their work using the products we sell here on the site and in our store. Not only do.. Read More
Hello and welcome to the first in a series of blogs from a very good customer of ours. Allan has been dealing with us for a long time and builds replica American police vehicles to an insanely hi.. Read More
        Lots of products up on the site this month, Here's a summary for those that don't use our Facebook page. Hella Mining: Mostly work lights with a power socket.. Read More
All Articles

Blog

The Sarge's Blog Part 3
  Hello troops and welcome back to 'The Sarge's Blog'!                 We're going to continue with the build of the 2003 Ford Police Interceptor. Today we'll look at the build of the centre console and some of the do's and don'ts when loading equipment into the console.       My console will consist of a Panasonic Toughbook laptop with docking station, night light, Motorola two-way radio, Whelen siren with PA, Federal Signal Information Matrix, Whelen Switchbox and Whelen Traf..
September products and news
        The website expansion continued this month with some new products lines as well as additions to existing ones. We added some new Peterson lamps in the form of rear LED combination trailer lamps and LED worklights. The air fittings were expanded to include air brake specifc SIRIT fittings. These are permanent single use brass fittings which are heavy duty and meant to last. Far more reliable than the re-usable type. They have a modular design for solid T's or swivel assemblies. Most of the work was behind the scenes in September but we have ..
Welcome!
        Welcome to our website. This section will be dedicated to our customers and their work using the products we sell here on the site and in our store. Not only does it give our customers a better idea of what we do beyond products available on the site but its free advertising for you the customer on our blog. Facebook and Twitter feeds. If you're an exisiting customer and have a new project or fancy new show vehicle you want to share please get in touch via email to submit your entry. Whether its your prize winning truck show vehicle or an example of the ..
The Sarge's Blog Part 1
Hello and welcome to the first in a series of blogs from a very good customer of ours. Allan has been dealing with us for a long time and builds replica American police vehicles to an insanely high standard. We'll be showcasing his work in a series 'The Sarge's Blog'. So without any further preamble I'll hand it over to Allan. Enjoy! - Welcome to the Sarge's Blog.   I've been asked to share my wisdom and experience with the followers of Stanley R Harris Ltd whom I've been a customer for over 20 years. Yes they're still taking my money! I've been in the Amer..
comments on this article - view comments
August products and news
        Lots of products up on the site this month, Here's a summary for those that don't use our Facebook page. Hella Mining: Mostly work lights with a power socket normally found on heavy plant vehicles and a padlockable battery master switch. The LED worklights are on a whole other level in terms of brightness comapred to the run of the mill stuff plus they are as tough as old boots thanks to the IP6K9K ratings. We may have found something other than cockroaches that'll survive a nuclear war. Also from Hella was a small expansion on our range of driving..
The Sarge's Blog Part 2
  Hello again and welcome back to the Sarge's Blog.       So today I'll show you the blank canvas and talk a little bit about wiring.           My car did see service in Texas so fitting the equipment on should not be an issue.   I would however need to establish if the equipment I propo..
How to Know Your Vehicle is Equipped for Anything
Have you ever heard about Murphy’s Law? Well if you haven’t, you have probably experienced it first hand – it states that if something can go wrong, it will go wrong, and usually at the worst time possible. This is what created a saying: “better safe than sorry”, and this is especially important when it comes to your safety, especially in traffic. This is why it is essential to regularly check your car and make sure that everything is in order, from the engine to the tires, and this is an absolute must before going on a long trip. First Things First: Equipment Cars get broken all th..
Take Care of Your Vehicle: Maintenance Tips

Your vehicle requires constant attention, and this fact is similar to the attention needed by a child. You need to check everything regularly or things can quickly go sideways. So, what are the most important things, when it comes to taking care of your vehicle?

7 Things To Consider When Buying A Used Truck
Buying a brand new truck can place a lot of strain on anyone’s budget, especially if you want to buy more than one for the purpose of starting your own line of work. Many professions nowadays use trucks as the main mean of transporting goods, and since these trucks are constantly on the road, they need to be in a good shape. Truck drivers are fully aware that regardless of the initial shape and maintenance, truck parts wear down eventually. This is why you need to be extra careful when buying used trucks, and test them appropriately before ascertaining their real value. Here are a couple of..
Tips to Effectively Expand Your Business and Fleet

The commercial vehicle sector is currently aglow with excitement, coming off the heels of another successful CV Show and news of record breaking demand

Website Design & SEO by AddPeople
©2013 Stanley R Harris Ltd All rights reserved. | SiteMap